Tester Programmed
- DFPRO
-
Tester Programmed
DFPRO hand held tester/programmer is a precious and useful device for the setting up, check and diagnostic of the Domino plant; it avoid the use of a PC for some operations.
The functions that can be performed by DFPRO are the following:
- Assigning and changing the address of modules
- Verifying the address assigned to modules
- Configuration of the parameters of special modules (e.g. DFIR, DFDM, etc.)
- Display the status or the value of input modules
- Display the status or the value of output modules
- Changing the outputs, both digital and dimmer types
- Getting the list of the modules installed in the plant
- Measuring the voltage level on the bus
- Checking of firmware version loaded into the modules
DFPRO can be directly connected to PRG connector (if available) of a single Domino module not supplied by the bus. This kind of connection is typically useful for assigning and checking the module address before its installation in the plant. (fig.1)
DFPRO can be also directly connected to the PRG connector of a module inside a Domino bus system, supplied by one or more DFPW2; in this case, many diagnostic and configuration functions can be performed. (fig.2)
DFPRO can be finally used as interface between a PC and the Domino bus (regardless of the activated menu). In this case DFPRO works in a way absolutely identical to the Domino DFRS interface. (fig.3)
Together to DFPRO, it is provided the cable for the fast and easy link to 3-way connector available on the Domino modules and identified as PRG connector. The cable for the connection between DFPRO and the RS232 port of the PC is also provided.
Power supply: By 9V alkaline battery, shape 6LR61 or by bus
Display:
LCD, alphanumeric, 20 characters x 4 lines, automatic back lighting with programmable timeout, adjustable contrast
Keyboard: 23 keys
Protections: Over-current on the bus output
Serial interface: RS232, cable/adapter provided
