Weather station interface 3M
- DFMETEO
-
Weather station interface 3M
The DFMETEO module has been specifically designed to acquire data from a weather station that measures variety of parameters to make them available to the system. These parameters can be thus viewed on DFTouch, Supervisor system or similar devices.
The module housing is 3M and it takes 4 input and 3 optional out addresses.
The module report the following information:
1) Temperature in Celsius degrees
2) Daylight in lux
3) Wind speed in m/s
4) Digital information like:
Rain
Twilight
Temperature >= Threshold
Daylight >= Threshold
Wind >= Threshold
Light from South
Light from West
Light from East
Sensor failure
The 3 thresholds (Temperature, Daylight and Wind Speed) can be set as fixed in memory or, by enabling 3 optional output addresses, as variables (e.g. setting by Touch screen).
Nota Bene: the weather station must be installed in a easily accessible site for periodic and accurate cleaning.
Power supply: by bus
Power supply of meteo sensor: 24V ± 15%
Current consumption DFMETEO: equivalent to 4 standard modules
Max sensor current consumption: 100mA
Temperature measurement: -30 ÷ +50 °C
Daylight measurement: 0 ÷ 99000 lux
Wind speed measurement: 0 ÷ 70 m/s
MODMETEO protection degree: IP20
Sensor protection degree: IP44
Numeber of bus addresses: 4IN and 3 optional OUT
Dimension: 3 modules for DIN rail
